axle seal

A general forum for all things Brockway.

Moderator: 359Huskidrive

axle seal

Postby McCune » Sat Sep 01, 2018 9:46 pm

my 1960 H257T has an Eaton R454 2 speed axle 20503 . there are not any production oil seals that fit my axle and hub combination. the felts are still good, the outer lock nut with the rubber lip need replaced and is there another gasket type thing that goes on axle shaft to run inside of this rubber lip on locknut. I have spents hours on the internet and talking to people and can't find any info on this.
McCune
 
Posts: 20
Joined: Fri Feb 05, 2010 6:51 am

Re: axle seal

Postby Enckway » Sun Sep 02, 2018 6:44 pm

Try Coles Truck parts in Davenport phone 607-278-9974....ask for Russ. He is old school truck guy. Unfortunately most his stuff burned few years ago but he has connections
User avatar
Enckway
 
Posts: 819
Joined: Wed Jan 11, 2006 11:00 am
Location: Unadilla,NY

Re: axle seal

Postby Huskiedrive2 » Mon Sep 03, 2018 1:11 pm

I am working on the same issue for fellow Brockway owner/collector Fred Little. There are wheel seals available to fit the spindle but not for the bore of the hub. I am going to machine a sleeve to press in the hub to reduce the bore by about 100 thousandths, then a production seal will fit.
Huskiedrive2
 
Posts: 301
Joined: Wed Nov 05, 2014 12:49 pm
Location: Horseheads NY

Re: axle seal

Postby Scranton 761 » Sun Sep 09, 2018 10:39 pm

Give this a shot too. I don't think he has anything in the building newer than 1980.
Truck Parts Inc.
2201 Washburn St, Scranton, PA 18504
(570) 346-1861
Paul Polcha
Project E761L .... Taking the time to do it right!
User avatar
Scranton 761
 
Posts: 321
Joined: Sat Dec 01, 2012 1:27 pm
Location: Scranton, PA


Return to Brockway Trucks Discussion

Who is online

Users browsing this forum: No registered users and 9 guests