It is currently Fri Sep 19, 2014 8:52 pm

Post new topic Reply to topic  [ 15 posts ] 
Author Message
Offline
 Post subject: 400 series/f700 sheetmetal
PostPosted: Sun Feb 19, 2012 9:05 pm 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
Looking for sleeper cab side skins and drivers side storage compartment door nos or good used will work Thanks Paul 607-343-5594


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Mon Feb 20, 2012 7:14 am 
User avatar
Send private message  E-mail  Profile

Joined: Wed Jan 11, 2006 11:00 am
Posts: 720
Location: Unadilla,NY
Paul,
I think I got you covered on compartment door. I need a aluminum fuel tank and air cleaner assembly if anyone has or stumbles on something?Brian


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Mon Feb 20, 2012 7:43 am 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
Thanks Brian. The f model?? When I get the 459 home chances are I will have some more cabover parts just have to ascess the situation. don't want to tell you I got something and then leave my project short on parts. Paul


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Mon Feb 20, 2012 4:31 pm 
User avatar
Send private message  Profile

Joined: Sun Dec 17, 2006 12:04 am
Posts: 110
Location: Woodstock,VA
Paul, you oughta get ahold of Glen and see if Walkers still has any of their NOS Mack side panels left.

_________________
Got a Bulldog, now all I need is a Husky.


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Mon Feb 20, 2012 5:19 pm 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
Keith, like minds think alike touched base with Glen over the weekend, the problem is getting the stuff home! Hoping someone local has the parts, did you get up to Bainbridge last summer?? Paul


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Mon Feb 20, 2012 5:40 pm 
User avatar
Send private message  Profile

Joined: Sun Dec 17, 2006 12:04 am
Posts: 110
Location: Woodstock,VA
If you need help getting them up there, between Glen and I we can work something out.

No, didn't make it up last fall, had too many things needing to be done around the house while I was on vacation and ran out of time. First time I haven't made it up since 95 and feeling a little guilty about it...... :oops:

_________________
Got a Bulldog, now all I need is a Husky.


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Mon Feb 20, 2012 6:42 pm 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
Thanks for the offer if I decide to buy from walkers let ya know. I figured you didn't come up since you didn't stop by for a visit, then I thought maybe I wasn't home when you came through.


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Mon Feb 20, 2012 7:41 pm 
User avatar
Send private message  Profile

Joined: Sun Dec 17, 2006 12:04 am
Posts: 110
Location: Woodstock,VA
You and Brian were both on my "hit list"..... :lol:
The biggest problem was, I put in for my vacation way in advance, then the flood hit a couple weeks before I went on vacation and having been there after the big one years ago, I thought better of coming up while everyone was still trying to clean up. I'd imagine the campground was under water again, and didn't call Dave to see if the motel was OK or not....

I'll be up sometime before June if at all possible, with or without the camper, I've got a couple relatives I really need to get up and see.

_________________
Got a Bulldog, now all I need is a Husky.


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Tue Feb 21, 2012 5:21 pm 
User avatar
Send private message  E-mail  Profile

Joined: Wed Jan 11, 2006 11:00 am
Posts: 720
Location: Unadilla,NY
Keith,
You can put your camper down by the river at either pauls place or mine and add a few brockways we will have a brock-e-cue.

Brian


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Wed Feb 22, 2012 8:06 pm 
Send private message  E-mail  Profile

Joined: Wed Feb 06, 2008 4:25 pm
Posts: 249
Location: Morning Sun,Iowa
Paul,
I have a set of NOS compartment doors,also NOS fenders and NOS front headlight panels,if you need any of that kinda stuff.

_________________
1944 152 152W10-24586
1967 457 E457T-66936
1974 358 N358LL-79726
1976 759 E759LL-90998
1973 457(parts truck)F457TL-80718
1974 457(parts truck)N457TL-80737


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Wed Feb 22, 2012 8:17 pm 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
What do you need for the drivers compartment door? will you ship it? Still looking for the skins right and left allready have fenders and headlight panels. thanks Paul


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Wed Feb 29, 2012 1:47 pm 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
Mike, Last we talked thought you had one in parts trailer I did find the compartment door locally, but still need other stuff. Will try call ya thanks Paul


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Thu Mar 15, 2012 8:09 pm 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
Formed my own drivers side lower skin and corner, but with the amount of time I got in it would still like to find pass side thanks


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Fri Mar 16, 2012 8:40 am 
User avatar
Send private message  E-mail  Profile

Joined: Sun Apr 01, 2007 9:18 pm
Posts: 671
Location: Waterloo,SC
Paul

If you need some parts brought North from Glen's I can swing by his place on my way up to either Springfield Mass or Macungie. First trip will be with enclosed trlr and second with just my F250 as I plan on dropping the trlr at my daughters in Doylestown between shows.

Brocky


Top
 

Offline
 Post subject: Re: 400 series/f700 sheetmetal
PostPosted: Fri Mar 16, 2012 4:07 pm 
User avatar
Send private message  E-mail  Profile

Joined: Sat Mar 29, 2008 10:14 pm
Posts: 530
Location: Afton NY
Thanks Brocky between you and Keith the transportation is covered. Waiting on Glen to check on part and price, will keep you posted. I am right off 88 on your way to or from Springfield give me pm and stop in if you have time! Paul


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron