Page 1 of 1

Its alive!!!!!!!!!

PostPosted: Wed Dec 26, 2018 5:47 pm
by leaddog361
Good news got the oil cooler back on and cleaned it up a little and she ran beautifully and there was no signs of contamination
Hope everyone had a happy holidays
https://www.youtube.com/watch?v=w3NWCBfB6iY
https://www.youtube.com/watch?v=L86vNxYSGNk

Re: Its alive!!!!!!!!!

PostPosted: Wed Dec 26, 2018 7:41 pm
by youngstown.huskie80
.

Re: Its alive!!!!!!!!!

PostPosted: Wed Dec 26, 2018 10:07 pm
by Huskiedrive2
That is great news. Make sure to run the engine to temp and get all the remaining moisture out of the crankcase. You could run in above idle for a while with the oil fill plug out of the valve cover to help purge the moisture. Don't rev too high It will blow oil out too. Engine need to be run fully warmed up. Glad you got it going.

Re: Its alive!!!!!!!!!

PostPosted: Thu Dec 27, 2018 7:21 pm
by leaddog361
I took the fuel tank off when I get it back on I’ll give it a run. I need some pictures to work off of for the interior and the rest of the truck.

361 huskidrive update

PostPosted: Mon Jan 14, 2019 9:10 pm
by leaddog361
Its been a few weeks so i though i would give a little update. As you see the frame was toast so i we made a all new bottom pieces, we also did did some sandblasting while we had the crossmember out i have the floor out as well and the one cab mount is rotted out. if any one has some pictures of the floor it would be much appreciated

Re: Its alive!!!!!!!!!

PostPosted: Mon Jan 14, 2019 10:43 pm
by Huskiedrive2
Here's a link to a series of posts by one of our members doing his father's E361. There are some very good pictures of the 300 series cab floor when he had the cab off and laying on it's back. Scroll down about 1/2 way down the page of all the photos.

viewtopic.php?f=1&t=1044&hilit=e361&start=400