Page 1 of 1

Are fiberglass fenders available for a 758?

PostPosted: Fri Feb 12, 2016 8:08 pm
by steve s.
A friend is looking for fiberglass replacement fenders for a 758. He has been told that someone still makes them. Does anyone know of a source ? I imagine that good used fenders might be acceptable, too. Thanks.

Re: Are fiberglass fenders available for a 758?

PostPosted: Sat Feb 13, 2016 6:41 pm
by Huskiedrive2
I don't believe anyone is currently making fiberglass fenders for any model Brockway at this time. Northeast Fiberglass was the last and NYS regulations got too tough to comply with so they stopped. A 761 fender may be able to be cut down to allow installation on a 758. That process works on a 361 cut to a 358.

Re: Are fiberglass fenders available for a 758?

PostPosted: Sat Feb 13, 2016 8:18 pm
by Scranton 761
Steve, if he finds 761 fenders have him contact me before the jigsaw comes out. The set I have are already cut.... I'll end up adding on if I have to use them.

Re: Are fiberglass fenders available for a 758?

PostPosted: Sun Feb 14, 2016 10:26 am
by steve s.
Thanks for the responses. I will pass on the information.

Re: Are fiberglass fenders available for a 758?

PostPosted: Mon Feb 15, 2016 7:49 am
by Mike Pacitto
Al at NE had the molds but was not making them anymore as Stan stated. Might be worth calling him to see if he will sell them. Any good marina will have the resources to make them if you had the molds.

Re: Are fiberglass fenders available for a 758?

PostPosted: Mon Feb 15, 2016 7:43 pm
by slate rock brock
Al has retired and no longer owns the molds. I purchased the grill molds and headlight bezel molds from him. I have expressed an interest to the current owner of the fender molds to take on the work of doing the fenders. The same folks that use my molds to make the grills made the fenders and grills for North East.

Re: Are fiberglass fenders available for a 758?

PostPosted: Wed Feb 17, 2016 3:47 pm
by Sled Dog
Richie, I bought the forms went Al was shutting down. I tried to get my local body shop to start making them, but to no avail. I have been working on another source, but if you have an interest PM me and we can go from there.
Peter A Grimm
518 three six five 2335

Re: Are fiberglass fenders available for a 758?

PostPosted: Mon Feb 22, 2016 2:00 pm
by dbaldwinjr
I have very good to new fiberglass 358 fenders available. Dane