Brockway Trucks Message Board

Brings back a lot of memories. Loaded 6 more loads. Reminds me of all the hrs I spent as a kid loading trucks and moving material. Started at the age of 5 in this machine. Love running the brock around town with the dump trailer.

Out working big John today. Had to use the small loader cause cylinder for lift is getting repaired

Found th his cool. Got the bottle from Kim's uncle today. Brockway glass company was in business from 1907 till early 80's

This was in construction equipment guide magazine. Anyone know who's brock.

Better to be topped off

Been running pretty hard lately. Encompass pipeline is replacing some gas line for national fuel and I have been hauling material away for them.

Had to rescue a tractor .Dropped an injector.

Got pulled over yesterday cause retired couple dont like trucks on there rd. Its local delivery and this has been an issue before. Trooper gave me a level 2 and found I was over on permit 88600# good for 85k. Also over on tear axles on trailer 49500# good for 47k. Also had a soft tire which is oos b...

Nice work Stan.

On it's way back together. I installed a regulator and on /off valve in the cab for the aniroid just in case mr d.o.t wants to smoke test.

Mine goes from cab to pump linkage

20190321_135745.jpg Well I picked up the orings and other stuff and we started to put the Jake's on and realised I had the wrong gaskets. So after a quick call to another company in the area that has a lot of 855's and pizza and wings we where able to reinstall them. Once on we found that my snuggi...

Typical for cummins not to have this old stuff in stock. Have to go get it tomorrow morning and Sam and I will finish it up. Sounds strong and responsive.

20190319_133012.jpg 20190319_124907.jpg 20190319_123636.jpg Bottom pic. We found valve tolerances to tight. So I decided that since we were this far and easy i would do injectors. Glad we did . In the top pic you can see the crap on the screen. All new installed just waiting for 3 small orings for ...

Dill is name

found this in the wire harness on rt side. Was made in 10/74 part # 533264

Sorry for duplicating. From my phone.

Got my belts straightened out for the fan. They have never run true since I put things together. Had to drill the holes to 5/8 in the mount to tweak the base. My fuel pressure gauge arrived today. All digital with sending unit at pump. Teltek is the manufacturer and goes to 300 psi. I think my rail ...